Tag Archives: PVC

Gym Mats & Gym Flooring

Gym flooring is often a fundamental aspect regarding comfort and correct surgical procedures of a gym. A number of factors might be of interest ahead of getting a brand-new gym flooring. They’re playability, longevity, durability, servicing and cost. A new fitness center floor uses a particular grasp.Read More www.rubberco.co.uk

Rubberized gym flooring is a popular floor employed in gymnasiums. They have substantial durability and is secure to the toes. Sound rubber flooring provides protection with regard to equipment. Rubberized flooring surfaces are simple to deploy as well as clean up. Vinyl along with laminated floors can also be popular. Vinyl is simple to wash as well as will come in various styles and designs. But it’s susceptible to water damage and mold. Soft takes quite a long time, however the chances of peeling are usually large. Plastic sheet gym flooring is flexible. There are also engineered wooden flooring, bamboo floors, laminate wooden floorboards along with hardwood flooring.ng.

There are tile gymnasium flooring meant to have the identical inflexible feel as being a wood floor, using less sound and no moisture troubles. Gym flooring flooring tend to be put in around rubberized underlay for really sound decline and surface area flexibility. However, humidity usually finds the method from the joins regarding porcelain tile into the rubber underlay.

Health club flooring insures are utilized to shield gym flooring, decrease routine maintenance expenses also to switch the fitness center right into a multi-use service. A few gym flooring pads are made totally using PVC. These people have a pressed anti-slip floor, and therefore are comfy, secure and secure. A few gym flooring yoga mats are made from high quality rubberized substance and also have interlocking ends, is bordered by so they cover. A few have interlock floor tiles specifically designed for gym activities. These people absorb shock and also sound that’s brought on by hefty exercise equipment and still have long-lasting longevity. Other gym flooring yoga mats are made of recycled rubberized.

Discover More About Sucupira

One of the latest and greatest hardwoods to hit the United States is Sucupira. This South American tropical lumber has been recently introduced to American homes and businesses. This Brazilian hardwood is also a wonderful, cost-efficient, and eco-friendly substitute to composite, PVC, and pressure treated woods. Many Europeans already enjoy the benefits that Sucupira decking and Sucupira flooring provide. Sucupira is sometimes known as Chocolate Decking or Chocolate Flooring and is a favorite among high-end European designers.

With rich brown colors and light gold striping, Sucupira is a wonderful flooring option. It is also very resistant to water as well as termites, mold, and decay. Make no mistake; this is one tough and durable hardwood decking option.

With a Janka hardness rating of 1980, this exotic hardwood will take a pounding better than softer wood options like cedar, pine, and even California redwood. Its density is a definite asset because denser woods tend to outperform and outlast more expensive materials that are unnatural. After all, the last thing you want out of your decking is to pay through the nose for it at first, get sold a bill of goods that it will last, only to have it fall apart on you due to mold, mildew, and decay. With solid wood materials like Sucupira, nature has already made it resilient to those common problems while also making it beautiful.

Sucupira is a versatile hardwood and has been used in many other non-residential applications. There are commercial projects throughout the world that use this wood. Some of the common places you can find Sucupira wood being used are in boars, furniture, railroad ties, and structural supports. Many high end furniture makers really love to use this wood to build Sucupira furniture because it creates truly unique pieces. After all, there is a lot of oak, or other wood furniture out there, but a chair, table, or cabinet made of Sucupira is truly a special piece.

Likewise, when people buy Sucupira lumber for major commercial projects, they are sure to create unique structures that stand out.

When you look at any outdoor space or floor made of Sucupira, one thing will be perfectly clear. This wood is very special. Many people rave about the gold tones that this wood has. It is those gold tones that, after its installed or the piece has been made, that really make structures and furniture shine. Also when it comes to sustainability and eco-friendliness, Sucupira is a sustainable wood that comes from managed forests.

The above is just the start of why Sucupira is a wonderful hardwood species to consider for your next major commercial project. There are also some wonderful wholesale decking and Sucupira suppliers that are starting to import this extremely durable and beautiful exotic hardwood species.

Maintenance tips for Amtico flooring!

Amtico flooring is a system of engineered flooring which is extremely durable. Moreover, it comes in a wide assortment of finishes copying exactly all conservative forms of flooring including stone, timber, marble and various other modern flooring alternatives of glass and metallic’s. As far as the construction of amtico is concerned, it is made by mixing together six layers of PVC which makes it a perfect and suitable option for any dry room of your house to wet regions such as bathrooms and kitchens.

The tiles not only provide individuals with a wide variety of designs but also offer choice in terms of patterns and textures as well thus providing an efficient solution for almost every need of a person. Moreover, the fact that Amtico tiles are all manufactured at the same thickness provides individuals with the ability to mix up and match any combination in order to generate their own exclusive flooring design. It will provide an artistic beauty of natural flooring materials. The best part is that the tiles do not get damaged easily. Moreover, it also does not undergo damage from stiletto heels.

It is very easy to take care of the Amtico flooring as the process takes very small effort and time to keep clean and look brand new. Habitual sweeping or vacuuming is one of the best ways of keeping these floors clean thus maintain their charm for a longer time period. It helps in removing dust and grit from the floor which is a basic step to care for floor. In addition to this, a regular weekly wipe with a moist mop is also compulsory depending upon the color of your flooring and your family’s standard of living.

The weekly cleaning command for any of the finishes or textures of Amtico flooring comprises of sweeping or vacuuming. Thereafter, Amtico Cleaner diluted 1:30 either with a spray bottle or a damp mop is applied. Finally, the floor is mopped with a dry mop. Always, wash your mop regularly and also keep changing the solution in your bucket whenever it gets dirty. Rub with a scouring pad designed for non-stick cookware in order to remove any scrape marks.

If you want a semi gloss finish instead of standard matt finish, you should consider dressing of new Amtico floor. Thus, it becomes clear with the above discussion that the process of cleaning and maintaining these floors is extremely easy and hassle-free as well. One only needs to keep some of the major points in mind in order to achieve better results in this regard.

About the Author:-

Jason Colling is a renowned writer who has written articles on various interior designing techniques related to floor decor. His articles focus on various uses of kitchen tiles and marble tiles.

How To Lay Laminate Flooring

Laying laminate flooring is a relatively easy task. However its important that all materials and steps are properly prepared for otherwise even the most seasoned DIY expert may make unecessary mistakes. The following guide gives step by step instructions on how to lay your laminate flooring. You should first verify which sub-floor you want to fit your Krono Original laminate flooring onto because the individual floorings are not suitable for every type of sub-floor.

Fitting laminate on screed

The floor must be absolutely level, dry, clean and firm. It is very important to sand down and fill any unevenness of more than three millimetres over one metre. You must use PE foil as a moisture barrier.

Fitting laminate on wooden planks

Loose floorboards must be fixed and uneven surfaces should be smoothed out to ensure a flat, firm surface to fit on. Fit the Krono Original laminate flooring at right-angles to the lengthwise direction of the wooden planks. You may not use PE foil on wooden sub-floors.

Laminate on wooden boards

Loose wooden boards must be fixed and any unevenness levelled out. The boards must be firmly connected to the sub-floor so that there is no creaking later.

Fitting laminate on PVC or linoleum floorings

These types of old flooring must be removed.

Fitting laminate flooring on hot water underfloor heating

Please ask a trusted heating specialist to heat your floor until it is dry. They have the necessary skills and records. A surface temperature of 25 degrees Celsius is advisable; you should never exceed 28 degrees Celsius. Old flooring must be removed.

Residual moisture

The screed should never exceed the following residual moisture values:

1.) Cement screed: With underfloor heating 1.8 percent CM; without underfloor heating 2 percent CM.
2.) Anhydride screed: With underfloor heating 0.3 percent; without underfloor heating 0.5 percent CM.

Before fitting your laminate flooring please make sure you go through these checklists.

A.) Tools checklist
You should have the following tools ready to hand at all times when fitting your

Krono Original laminate flooring:

Spacer wedges
Circular saw, Jigsaw or handsaw with a finetooth
Angle for undercutting the doorframes
Tapemeasure, pencil
Laminate fitting kit
Tapping block, Hammer
Acoustic sound underlay (for floorings without a Sound Absorb System)

B.) Materials & accessories checklist

Precise measurements of your room
Laminate flooring
Clickseal one tube is sufficient for ten square metres of laminate flooring
Skirting boards Solid wood, PVC or MDF with real wood vaneer
Scotia or quadrant beading transition and edge profiles
Fixing clips (30 clips per pack of Krono Original flooring)
Vapour barrier layer, Gold/Silver dune underlay
Foam underlay

Please also note that additional transmitted sound insulation is necessary for laminate floorings without S.A.S (Sound Absorb System). Under certain circumstances you may also need Clickguard or a comparable joint seal, joint sealing compound and glue/bonding agent.

Before fitting: Store the packs of flooring for 48 hours under the same climatic conditions as for fitting.

An important requirement for installation and long durability of the laminate floor is a room climate of around 20 Celsius and a relative humidity of 50 to 70 percent. The sub-floor must be absolutely level, dry, clean and firm.
When fitting on a mineral sub-floor such as concrete, cement screed, anhydride screed or stone tiles you must measure the moisture first. The screed should never exceed the following residual moisture values:

1.) Cement screed: With underfloor heating 1.8 percent CM; without underfloor heating 2 percent CM.
2.) Anhydride screed: With underfloor heating 0.3 percent; without underfloor heating 0.5 percent CM.

Before fitting on concrete underfloors you must fit a suitable vapour barrier
underlay (Gold/Silver dune underlay) to protect against moisture. Fit the sheets with a 20 cm overlap and fix with aluminium tape.

Carpeting is not a suitable underlay; you must remove all remaining carpeting before fitting the laminate. Laminate flooring is laid as a floating floor; you may not fix it to the sub-floor. Please use 2 millimetre PE foam underlay or another suitable underlay, maximum 3 millimetres thick, as transmitted sound insulation for floorings without S.A.S impact sound insulation. Please lay the sheets in the same direction as the panels. You should lay opened packs of flooring immediately.

Generally you have three options for fitting laminate flooring:

1.) Fast, glue-free laying

2.) Laying with Clickseal or comparable joint sealing. This ensures the floor is permanently protected against the effect of moisture from above. The floor can be nevertheless be taken up again and relaid.

3.) Laying with glue also provides permanent protection against moisture; however, the work is more time-consuming and complicated and the flooring can no longer be reused.

Laying Laminate

If the walls are not straight, please trace the line of the wall onto the first row of panels and saw the panels accordingly. Before laying the panels measure the depth of the room first. If the last row of panels has a width of less than 5 centimetres you must evenly distribute the remaining measurement between the first and last row of panels so that both rows are cut to size with the same panel width.

Always maintain a 12-15 mm distance from walls, heating pipes, columns, door stoppers etc. You can use spacing wedges to fix this distance. Expansion joints (at least 2 cm wide) are needed if the laying area is more than 8 m long or wide. Please also note that these are also required when laying flooring continuously over more than one room. Here the laying areas have to be interrupted in the area of the door frames. To this end, use profiles from our range. These movement joints can be professionally covered using the appropriate profiles.

Tip: Lay the panels lengthwise in line with the main light source!

Start laying in the left-hand corner of the room. The protruding lower groove cheek should be facing the layer. Lay the 1st row of panels by joining together the first two, and then each further panel, with an installation aid (panel off-cut with lengthwise tongue profile). Tip: In general, you should set the fitting aid lengthwise in the area of the two head joints and then finally align the elements. This prevents damage when sealing the panels.

Now knock the panel to be laid, in a flat position, with the flat of your hand until a pre-latching effect is achieved over the whole width of the panel.
To do this the chock is placed on the panel lengthwise to the head joint. Please ensure the tapping block protrudes by around 5 – 10 millimetres beyond the edge. This ensures the surfaces of both panels joint flush with each other. Repeat the above procedure to lay the whole of the first row of panels. Use spacing wedges to ensure a 12 -15 millimetre distance is maintained from the wall!

Start the second row left-hand side by inserting the long tongue side of the panel at a 30 degree angle slant into the bottom groove cheek of the panels that have already been laid (the 1st row) and twist it in and downwards with light pressure. Begin each new row with the remaining piece (at least 20 centimetres long) of the previous row. The space between the transverse joints of one row of panels and the next should be at least 40 centimetres.
The following panels are first inserted on the lengthwise side and then just before lowering the head side is pressed tightly against the previous panel until the overlays joint together.

Now tap the flat panel with the palm of your hand in the area of the transverse joint until a locking-in effect is achieved across the whole panel width. Then lock the head joints by lightly hitting them with the hammer and chock. Use the fitting aid too. Lay all the remaining panels by repeating the given sequence.
If necessary, close the transverse joints by tapping them from the side with a suitable tapping block. To cut the last row in the panel to size, rotate it through 180 degrees; place it with the decor side facing upwards next to the already laid row (groove cheek to groove cheek). Allow for the wall spacing on the end face. Mark the panel and saw off. To avoid splintered edges the dcor side must be facing downwards if you use an electric compass saw or circular saw to cut the panels. Otherwise saw the panels with the dcor facing upwards. If necessary use the drawbar to fix the last panel in a row. After laying panels remove the spacing wedges.

Holes, which are 3 centimetres larger than the pipe diameter, must be cut out for heating pipes. Saw out a V-shaped “adapter piece”, glue, fit into place and fix with a wedge until the glue has hardened. Then cover the cut-outs with radiator rosettes.

Please shorten wooden door frames so that an element with impact sound insulation fits under it, so that the laminate flooring can move without restriction here too if the rooms climate changes.
For a perfect finish at a wall, fix the skirting board clips at 40 – 50 centimetre spacings along the wall, and then attach the matching skirting boards suitably cut to size.